|
Post by garth on Mar 20, 2010 14:19:20 GMT -5
My grinder started making some bearing noise in the bowl feedthrough. I took it apart and think I can make it a bit more robust. The bottom bearing is a standard bearing (6202-2rs and the top is brass with a seal on either side. The seals have deteriorated so I'm going to put a standard sealed bearing in place of that. The housing is currently a semi crystalline plastic and will make that stainless. I'm getting a quote on the stainless part so if anyone is interested, the more I have made the cheaper it is and will pass that on to you. The bearings are $3 each.
|
|