|
Post by pairak on Jan 21, 2021 14:47:12 GMT -5
I have a Spectra 11, after making chocolate this christmas I noticed that in one of my granite rollers, the white plastic part in its hole is loose. Its not in a danger of falling out, but its not stuck to the roller. In my last batch I noticed that a few times one of the rollers werent moving, so im guessing that was the reason. Is that something I can fix? Like can I just apply glue? If so, what kind? Or do I have to buy new rollers? Anyone else had this happen?
|
|
|
Post by mark on Jan 21, 2021 21:12:01 GMT -5
They do wear out over time and you can order replacements.
|
|
Jim B.
Novice
Newbie
Posts: 118
|
Post by Jim B. on Jan 22, 2021 16:58:05 GMT -5
As Mark said, the bushings will wear out and need replacing. However, speaking to the rollers not moving, I have noticed this with my Spectra 11 as well. Oddly enough, if I pull the roller assembly out and rotate it 180°, both wheels will work normally. Apparently things are not as "square and true" as we would hope!
|
|
omo
Neophyte
Posts: 1
|
Post by omo on Sept 17, 2021 5:23:53 GMT -5
hello, I have a spectra 11, and i just noticed that the connector spins with the drum, this makes the roller stonesspin instead of rotating on its axis.pls how do I resolve this problem. thks
|
|