|
Post by redstar on Oct 9, 2009 3:34:26 GMT -5
My Ultra grinder has been seeping chocolate through the base for a while. This has got worse and I urgently need suggestions on food-grade adhesives that I can use to either seal the leaks or re-bond the assembly. Any ideas? The unit hasn't been unreasonably hot - it occasionally gets up to 60-65C in use but most of the time it conches at about 55C. Mid-batch, of course!
Thanks, Duffy
|
|
|
Post by cheebs on Oct 9, 2009 9:01:44 GMT -5
|
|
|
Post by redstar on Oct 9, 2009 9:17:04 GMT -5
Hi Cheebs,
Many thanks. I guessed you migh come to the rescue after seeing the photos of your "pimped" Ultras. Did you see the recommended end-uses of the adhesives? Endoscope repair and catheter balloon attachment.... I've asked for a sample and will report back on the efficacy of the glue.
Rgds, Duffy
|
|