bart
Neophyte
Posts: 6
|
Post by bart on Jan 9, 2024 17:00:44 GMT -5
Hi!
I've just ordered the tilting 4.5l melanger/refiner from Premier and I wonder if I should change it for the 3.5l one (still possible).
What is the minimum amount of pour (stuff) that is required for the 4.5l tilting version to work properly? If you have info on the 3.5l would like that too.
Thanks!
|
|
|
Post by Chip on Jan 9, 2024 17:17:02 GMT -5
I have had both, and much prefer the tilting over the3.5l I have made batches as small as 900g; 450 nibs, 450 sugar. I'm sure you could go smaller, the only worry is to go to large in my opinion but Ben is the real expert.
|
|
bart
Neophyte
Posts: 6
|
Post by bart on Jan 9, 2024 18:29:07 GMT -5
Thank you! In the meantime I found that the manufacturer says the amount for both models is equal, so I've decided to go with the tilted one - especially since you endorse it . Still, if there are any more tips on the minimum amount I would much appreciate it!
|
|
|
Post by Chip on Jan 9, 2024 19:11:19 GMT -5
I think you will only get that by trial and error. If you truly want to make small batches, you could always get the small batch drum and stones. That will make very, very small batches.
|
|
|
Post by nuage9 on Jan 9, 2024 23:16:08 GMT -5
I had the same thought and I got the tilting one with the micro batch drum in addition.
Btw is the 3.5l drum compatible with the larger tilting refiner base?
|
|
|
Post by Chip on Jan 10, 2024 8:40:42 GMT -5
I think the smal batch drum is compatible with both. They both use the same center post setup.
|
|
|
Post by nuage9 on Jan 11, 2024 1:49:52 GMT -5
Thanks Chip, what about the medium size bowl? The 8lb one?
|
|
|
Post by Chip on Jan 11, 2024 6:41:56 GMT -5
If I were to guess, I would think all of their smaller bowls would be compatible with the 10lb tilting melange. But! That is my opinion, not fact. Just shoot them an email and they are usually pretty quick in getting back to you.
|
|
|
Post by Ben on Jan 11, 2024 10:29:50 GMT -5
I think Chip's answered all the questions. I'd just add that really small batches just make everything more difficult. With small batches, it's hard to make sure that everything gets ground completely as stuff gets stuck to the drum wall, the sides of the stones, the center post, etc. With enough material in the drum, it helps to keep everything flowing. Also, it's hard to maintain a high enough temperature. Lastly, tempering a very small batch is very fiddly and error prone.
Depending on how small you want to go, I'd second the recommendation of looking at the small batch bowl and stones.
|
|