|
Post by Freddo on Oct 10, 2013 16:40:17 GMT -5
Hi
I am looking at a 50m2 space for opening my first factory production. It currently has three rooms, one of those rooms is also the entranceway.
just wondering if anyone can share with me the configuration of their setup?
Do I need to keep the grinders (2 x 20lt three phase) in a low humidity environment and seperate from the moulding room?
rgds
Fred
|
|
|
Post by kevin on Oct 11, 2013 10:38:06 GMT -5
Yes I think it is a good idea to keep those two things separate. From what I can tell grinding creates humidity so I do not know if being in a high or low humidity environment for grinding would make that much of a difference.
|
|
|
Post by Freddo on Oct 15, 2013 23:35:04 GMT -5
Ok Thanks. I am going to make a separate room for the grinders.
|
|
|
Post by daniel on Dec 2, 2013 15:11:38 GMT -5
What's the smallest amount of space you can put the grinders in? I have access to a 120 square foot room with 12 ft ceilings, but not external ventilation. Is that enough to drive off humidity and volatiles?
|
|