|
Post by tocoti on Jan 6, 2012 22:32:22 GMT -5
For those of you that like to make things better. This is a modification I made to minimize belt wear . The belt contact on the pulley is greater and the tension is constant. The idler pulley is from the farm store. I made the bracket, the spring is from the exhaust of a snowmobile, and the belt is from a 93 Saab 900. Enjoy. Attachments:
|
|
|
Post by chocobog on Jan 14, 2012 11:07:31 GMT -5
Hi Tocoti, Looks like a nice mod. I am just starting to use my Ultra Grind+ but I'll keep it in mind. My next step in terms of belts was to look at replacing the rubber belt with the fiberglass/kevlar belts made of small buckles as is discussed in other threads.
Not sure if I have a snowmobile or old car I can take apart though.
Felipe
|
|