kwarner
Neophyte
Just when you think you've got it figured out, you get goo.
Posts: 24
|
Post by kwarner on Aug 22, 2020 22:22:25 GMT -5
Here is a disassembled view of the bushings, shaft, wheel, and nut. Moderator Ben mentioned that the design may have changed so I thought I'd share these photos for all future reference. I had just washed the unit so don't mind the water, and best to you all. Ps- 17mm socket or wrench on the main nut works well. 7/16" for the nut which tightens the scraper blade arms in place (not shown). ibb.co/7Rwpdrqibb.co/pbg9y3Q
|
|