|
Post by Chip on May 13, 2020 9:10:36 GMT -5
fred, That could be either the bowl or the scraper. My scraper does not wipe the bowl super clean as it rotates, there is always a little line here or there. I just use a silicone scraper (spatula) and every so often just scrape it manually as it turns. I have also found that adding a 2nd thermometer to the bowl works great. I have reattached the photo on how i added a secondary probe/thermometer.
|
|
fred
Novice
Posts: 144
|
Post by fred on Jun 28, 2020 11:56:27 GMT -5
Chip - thank you for this! I can't quite see in the photo where the second thermometer is, but I noticed your probe thermometer is a lot taller than mine is. It looks like I could put an instant read digital thermometer in the hole next to the probe on the scraper - that would actually be very helpful since I don't quiet trust the reading from the probe.
|
|